Cờ lê lực CEDAR model DIW-15 - Cần xiết lực Cedar - Máy kiểm tra lực Cedar - DIGITAL TORQUE WRENCH

Screw tightening control

Video hướng dẫn sử dụng Cờ lê lực CEDAR model DIW-15/20/75/120:

● DIGITAL TORQUE WRENCH  DIW-120/75/20/15

Yes-no decision conditions etc. can save five channels.
.. A channel is only changed even if bolting conditions change.
It is not necessary to reset up a maximum value and a minimum value one by one like former.

*The torque screwdriver is Ergonomic and light weight, yet ruggedly constructed 
*Available in: lb-in, kg-cm and N-m 
*Peak, Real Time and Peak Down measuring mode (selectable)
*800 data memory.
*Programmable High and Low set points with both audible beep and Green/Red LED indicator for uniform torque tightening or GO/NO GO testing 
*Programmable screw tightening counter
*Programmable Auto Zero function resets unit to zero for easy operation
*Both CW and CCW operation
*ASCII format output(USB)
*Runs on internal Ni-MH batteries (for 12 hours) Auto shut-off after 10 min. of non-use
* AC charger and carrying case included.

NEW　DEVELOPMENT
Wrench head awivels 300°

Specification

DIW-15

DIW-20

DIW-75

DIW-120

Measuring range  N・m
(at the time of Track)

0.20 - 15 N･m

0.20 - 20 N･m

0.20 - 75 N・m

2.0 - 120 N・m

2.0～150 kgf・cm

2.0～200 kgf・cm

2.0～750 kgf・cm

20～1200 kgf・cm

2.0～130 lbf・in

2.0～174 lbf・in

2.0～650 lbf・in

20～1040 lbf・in

Accuracy

±0.5% 
(199 or less digit±1digit) 

±0.5% 
(499 or less digit±3digit)

±0.5% 
 (199 or less digit±1digit）

Display

The 4 figures digital display of LCD

The measurement direction

CW-CCW (right and left)

Measuring
mode

P-P  Peak

Holding Peak Load Value

T-R  Track

Showing Real time torque value ( Used for Zero-Adjustment )

P-D  Peak down

Holding Load Value at the moment to change from upward to downword

C Real-time output

Load torque value is outputted every about1/ 160 second

Decision 
function

Setting of torque value

Programmable High and Low setpoints with both audible beep and Green/ Red LED indicator for uniform torque tightening or GO/NO GO testing

The Maximum, the minimum, and the average value

The data number, the maximum, the minimum value, and the average value of memory data are displayed.

Data spec.

Data transfer

ASCII format (Baud rate : 19200)

Data memory

800 data

A setup of the number of counts

One to 99 count   (count in a direction with a bundle)

Auto power save

10 minutes no use, automatically switch off.

Charging time

From empty - less than 5hours

Continunous working time

12 hours

Outside size

φ34(grip)×236(L)

φ34(grip)×235(L)

φ34(grip)×320(L)

φ34(grip)×445(L)

Weight (about)

430g

470g

620g

830g

Socket engagement

6.35  square, including steel ball

9.5 square, including steel ball

12.7 square, including steel ball

Attachment

-

One-way socket

Accessories
 (one piece each)

AC/DC adaptor

An inspection report, a proofreading certificate, a traceability system figure