Thiết bị đo lực xoắn Cedar model DI-9M-8

Management of electric screw driver

●Torque Meter 　DI-9M-8/08

DI-9 series is most suitable for checking and controlling the torque of
Electric Screwdriver and Torque Driver.

Yes-no decision conditions etc. can save five channels.
.. A channel is only changed even if bolting conditions change.
It is not necessary to reset up a maximum value and a minimum value one by one like former.

The best for everyday check of an electric driver
Wide measurement range (0 - 8000digit)
Can measure without inversion Rolling-back work efficiently by OW joint (PAT.P).
Change of Measurement Unit Can be Performed 
Data Output is USB Form (B Type).
Memory Data are 800 Affairs
Real-time Output is Every 1 / 180 Seconds.

Specification

DI-9M-8

DI-9M-08

Measuring range

0.020-8 N･m

2.0-800 mN･m

0.20～80 kgf・cm

0.020～8 kgf・cm

0.20～70 lbf・in

0.020～7 lbf・in

Accuracy

  ±0.5%  (499 digit or less  ±3digit)

Display

The 4 figures digital display of LCD

The measurement direction

CW-CCW (right and left)

Zero return by one touch

Return to zero by pressing clear button.

Measurement   Mode

Track , P-P(peak to peak) , P-D(Peak-Down) , C(Real-time Output)

High and low limits judging function

High and low value are measurement within the limits, and can be set up.

Real-time Output

Load torque value is outputted every about1/ 180 second.

The Maximum, the minimum, and the average value display

The maximum, the minimum value, and average value of the saved data

Data Output

ASCII format (baud rate 19200)

Auto power save

10 minutes no use, automatically switch off.

Power supply

Ni-Cd chargeable battery 1.2V × 5cells 700mAh

Charging time

About 3hours

Continuous working time

About 12hours

clearance

It is a display clearance in set-up time.   (0.1 - 3.0 sec)

Socket size

□ 20mm/  □9.5mm

Dimension / Weight

W:160×D:125×H:55 / About 1kg

Recommend buffer accessories

Measuring joint
OW-20/OW-60

Measuring joint
OW-025/OW-10

Cube (with a 5th page screw hole)　20x20x20
　(M2.6/M3/M4/M5/M6 Tap processing)

AC/DC adaptor

Exclusive receipt case

An inspection report, a proofreading certificate, a traceability system figure

● MEASURING JOINT OW series

  Since our company developed the buffer
    with little influence of fricative,
    stable measurement could be performed
   Moreover ,it does not need to reverse-rotate 
    at the time of  measurement, 
    and work efficiency  improved.

Specification

Type

OW-025

OW-10

OW-20

OW-60

Measuring range   N･m

0.25

1

2

6

Mechanical life   （times）

10,000

8,000

5,000

5,000

Outer 
diameter
size
（mm）

Bit 
engagement 
part 
(screw part)

M2.6 cross
recess screw

M3 cross
recess screw

M4 cross
recess screw

M6 cross
recess screw

The standard screw is cross recess screw 
but they may be altered as necessary

Outside diameter

φ28

φ32

φ32

φ38

Height

44

51

51

69

Ｉnstallation

20square ×4(t)