Thiết bị kiểm tra lực xoắn Cedar model DIS-IP05 - Thiết bị đo lực xoắn Cedar - Thiết kiểm tra lực xoắn Cedar-TORQUE TESTER 

● TORQUE TESTER 　DIS-IP series

Yes-no decision conditions etc. can save five channels.
.. A channel is only changed even if bolting conditions change.
It is not necessary to reset up a maximum value and a minimum value one by one like former.

Management of various torque wrench torque drivers


The main features
□ Yes-no decision　
□ Average calculation
□ Data storage is 800 affairs.
□ A convenient functional setup of a setup of a measurement start value etc.
□ Data output at real time (every about 1/180 seconds).　
□ USB terminal data output

□It is a rechargeable battery drive, the installation to the spot is also easy.
□By the auto power OFF, It prevents forgetting to turn off the power.
□One-touch zero adjustment
□An auto clearance (0.1 0.5 1.0 1.5 2.0 2.5 3.0 sec) can be set up.
　　It is very convenient for a continuous check.
□The operation torque of a QL type and pre set  type wrench driver can read measured value correctly in peak down mode (P-D).

Specification

DIS-IP05

ＤIS-ＩＰ5

ＤIS-ＩＰ50

ＤIS-ＩＰ200

ＤIS-ＩＰ500

Measuring range
(at  time of Track)

2.0～500 mN･m
0.20～50 kgf・cm
0.20～45 lbf・in

0.020～5 N･m
0.20～50 kgf・cm
0.20～45 lbf・in

0.20～50 N･m
2.0～500 kgf・cm
2.0～450 lbf・in

2.0～200 N･m
20～2000 kgf・cm
20～1740 lbf・in

2.0～500 N･m
20～5000 kgf・cm
20～4500 lbf・in

Accuracy

±0.5%     (499 or less digit±3digit)

Display

The 4 figures digital display of LCD

The measurement direction

CW-CCW (right and left)

Measuring
mode

P-P  Peak

Peak load value hold.

T-R  Track

Indication of real time torque value.

P-D  Peak down

Holding Load Value at the moment to change from upward to downword

C Real-time output

Load torque value is outputted every about1/ 180 second .

Decision 
function

Setting of torque value

A Maximum and a minimum value are in a measuring range, and a setup is possible.
Can confirm the set value by the buzzer sound or LED.

The Maximum, the minimum, and the average value

The maximum, the minimum value, and average value of the saved data

Automatic Clearance

Automatically clear the displayed value after certain time (0.5 - 3.0 sec,selectable at each 0.5 sec). Setting 0.0 sec for manual Zero clearance

One-touch zero

Easy Zero-Adjustment with pressing CLEAR button

Data spec.

Data transfer

ASCII fomat (Baud rate :19200)

Data memory

800 data

Power supply

Ni-Cd chargeable battery 1.2V×5cells 　700mAh

Auto power save

10 minutes no use, automatically switch off.

Charging time

about 3 hours

Continunous working time

12 hours

Meter outside type dimension

100(W) x105(D) x40 (H)  (It does not contain by the projection thing.)

Weight

Meter part    520g

Code length

Standard 1m (there are automatic machines no less than 4m as an option.)

Accessories
 (one piece each)

AC/DC adaptor

An inspection report, a proofreading certificate, a traceability system figure

Detection machine size figure

Detection machine outside figure

Form

IP05/5

IP50

IP200

IP500

Ａ

Φ40

Φ50

Φ60

Φ80

Ｂ

41.2

63

73

99

Ｃ

5

10

10

15.5

Ｄ

Φ60

Φ90

Φ110

Φ140

Ｅ

Φ50

Φ74

Φ90

Φ116

Ｆ(Three division)

Φ4.2

Φ6.3

Φ8.3

Φ10.5

Ｇ　(Socket intuition affinity)

6.35ｓｑ

9.5ｓｑ

12.7ｓｑ

19ｓｑ

weight

189ｇ

632ｇ

1.8ｋｇ

3ｋｇ