Đồng hồ đo áp suất điện tử Daichi Keiki model DDIT/ DDIP

Danh mục sản phẩm

Dịch vụ sửa chữa

Hỗ trợ trực tuyến

PHONG KINH DOANH

0898980203

HOTLINE3

0909053576

HOTLINE1

0904259271

HOTLINE2

0938825913

Bộ đếm truy cập

	Đang online	5
	Hôm nay	15
	Hôm qua	1140
	Tuần này	1155
	Tháng này	37133
	Tất cả	4530604

Đồng hồ đo áp suất điện tử Daichi Keiki model DDIT/ DDIP

- Tên sản phẩm: Đồng hồ đo áp suất điện tử Daichi Keiki model DDIT/ DDIP

- Model: Đồng hồ đo áp suất điện tử Daichi Keiki model DDIT/ DDIP

- Tiêu chuẩn: JIS

- Xuất xứ: Japan

- Đơn giá: lien he ()

- Bảo hành: 12 Tháng

- Model khác: Đồng hồ đo áp suất điện tử Daichi Keiki model DDIT/ DDIP

Đặt hàng

MÔ TẢ SẢN PHẨM

play an active part in the etching in liquid crystal and the PDP manufacturing facility, a phenomenon device, the detachment device. Pressure monitoring of the corrosive fluid and gas which were difficult conventionally by attaching a diaphragm device to a digital pressure gauge is possible.

Pressure monitoring of the corrosive fluid and gas which were difficult conventionally by attaching a diaphragm device to the digital pressure gauge DI series is possible. I play an active part in the etching in the liquid crystalline manufacturing facility, a developing device, the detachment device.
I partition it off in diamond Fulham that a measurement electric current body circulates directly and does not contact the indication department and enclose a suitable liquid to let the indication region transmit the pressure that this increased smoothly. Diagram Fulham can choose various kinds of materials which a measurement fluid matched for a simple board form.
The pressure gauge of the strong causticity fluid, the diameter of a transmission area of the pressure and the joint is used for the pressure gauge side of the high viscous thing widely structurally again because I can raise it. It is a product suitable for oil, paper manufacture, Yakuhin Kogyo.

Diaphragm-type digital pressure gauge DDIT/DDIP

Digital pressure gauge indication department
Model number	Sensor classification	Pressure span		Power supply	Cable connection shape
DDIT Analog output There is no point of contact	L: General low-pressure business	It is 0 - 50kPa P50 It is 0 - 200kPa P200　　 It is -100 - 0kPa V100	It is 0 - 100kPa P100 It is 0 - 500kPa P500 It is -100 - 100kPa C100	It is DC 24V 4	N: Standard connector W: Waterproofing connector S: With cable direct soup stock 2m
	T: General moderate pressure use	It is 1MPa P1		It is DC 24V 4 It is AC 90 ... 7 　 240V-free	W: Waterproofing connector
	Q: General-purpose moderate pressure use	It is 1MPa P1
DDIP Two points of setting output Analog output	T: General moderate pressure use	It is 1MPa P1
	Q: General-purpose moderate pressure use	It is 1MPa P1

Digital pressure gauge indication department

Connection

Flange materials

Diagram materials

Lower flange materials

Clamping bolt materials

Enclosure liquid

It is R3/8 R3
It is G3/8 G3
It is R1/2 R4
It is G1/2 G4
It is 10k-10A F10
It is 10k-15A an F15
It is 10k-20A F20
It is 10k-25A F25
It is 10k-40A F40
It is 10k-50A F50

It is PVC 1

It is SUS304 2

It is S25C 3
(Cr plating)

1: Teflon

It is tantalum 2

It is SUS316L+ Teflon 3
Coating

It is SUS316L+ rubber lining 4

It is EPDM rubber 5
(vacuum gauge, meter impossibility to connect)

It is PVC 1

It is HT-PVC 2
(heat-resistant エンビ)
It is PP 3

4: Teflon

It is PVC 1

It is SUS304 2

Pure water more than 1:

It is propylene 2
Glycol
It is glycerin 3

It is silicon 4

It is die furoyl 5

※Please refer to the catalogue of the diaphragm-type pressure gauge for the details.

Specifications

Indication department specifications
		DDIT	DDIP
Indication		1999 31/2 figure red LED (letter high 14.2mm)	Four columns of red LED (letter high 14.2mm)
Sampling speed		ー	I can change 1-500 times/s of it
Indication conversion speed		Approximately 2.5 times/s	I can change 1-25 times/s of it
The comparison setting output	Output score	ー	Two points (as for the set point, setable voluntarily)
	Comparison condition	ー	Hi setting: Measurements >= set point = output ON Lo setting: Measurements <= set point = output ON (setable two points voluntarily each in Hi or Lo)
	Comparison set range	ー	-5000-5000
	Hysteresis Set range	ー	0-999
Point of contact rating		ー	Photomuslin relay output AC/DC combined use Load voltage 240V, load electric current 120mA or less
Use temperature humidity range		0-50 degrees Celsius, 35-85% RH (freezing, dew condensation impossibility)

Sensor classification specifications
Model	L: General low-pressure business	T: General moderate pressure use	Q: General-purpose moderate pressure use
Pressure span	50.100.200 ・500kPa 50.100.200 ・500kPa abs	1MPa	1MPa
Non-straightness	± 0.2%R.C.	± 0.3%R.C.	± 0.8%R.C.
Hysteresis	± 0.1%R.C.	± 0.3%R.C.	± 0.8%R.C.
I permit it and overload it	300%R.C.	150%R.C.	150%R.C.
I overload a limit	400%R.C.	200%R.C.	200%R.C.
Of the point zero Temperature influence	± 0.02%R.C./ ℃	± 0.02%R.C./ ℃	± 0.02%R.C./ ℃
Of the output Temperature influence	± 0.02%R.C./ ℃	± 0.02%R.C./ ℃	± 0.1%R.C./ ℃