Model

MJ100

MJ110

Power supplyPower supply voltage

DC5V(4.5V～6V)

DC12V～30V(11V～31V)

Power consumption

4W

3W

Output interface

Line driver (EIA-422 compliance)

NPN open collector(IOL=50mA max.)

Output

AB quadrature・Z phase・UVW phases・Alarm

AB quadrature・Z phase・Alarm

Number of divisions

1000, 960, 800, 512, 500, 480, 400, 256, 240, 200, 128, 120, 100, 80, 64, 40 and 1/2 of each of these (which does not satisfy the synchronized reference point specifications.)

Maximum response speed

1000divisions

6kHz:when connected to PL25 1800m/min when connected to PL60 720m/min

600Hz:when connected to PL25 180m/min when connected to PL60 72m/min*1

500divisions

15kHz:when connected to PL25 4500m/min when connected to PL60 1800m/min

1.5kHz:when connected to PL25 450m/min when connected to PL60 180m/min*1

200divisions

42kHz:when connected to PL25 12600m/min when connected to PL60 5000m/min

4.2kHz:when connected to PL25 1260m/min when connected to PL60 500m/min*1

120divisions

70kHz:when connected to PL25 21000m/min when connected to PL60 8400m/min

7.4kHz:when connected to PL25 2220m/min when connected to PL60 888m/min*1

Phase difference

100ns

1μs

Alarm*2

Speed alarm (minimum phase difference time or maximum response frequency); Level alarm (0.4 Vp-p or less); Minimum alarm time: approximately 400 ms

System startup time

Within 0.5 seconds after the power comes on line

Compatible head unit

PL25or PL60

Operating temperature

0℃～45℃

Storage temperature

-20℃～60℃

Dimensions

138×93×26(mm) ncluding protrusions

Mass

350 g

Accessories

Manual・Output connector・connector cap・mounting screws・Ferrite core

Option

SET-P16-1 (for external reference point) Scale extension cable, external reference point extension cable, Output connector with cable