Individual measurement

Measure the anti-static performance of shoes individually. Prevents faulty measurement with the divider on test plate.

Evaluation external output

Evaluation results can be output through the external output terminal to interlock with other device, to open door, turn on signal, etc.

・When PASS LED is lit

It indicates that the resistance of the anti-static shoes and the person wearing them is inside the set range.
The resistance range of the shoes at that time is indicated by the LED lamps, therefore the characteristics of the anti-static shoes can be checked.

・When FAIL LED is lit

It indicates that the resistance of the anti-static shoes and the person wearing them is outside the set range.
Determine the cause and take actions including replacing the anti-static shoes, etc.

If the measured value is below the lower limit

Example) Soles are worn down.
A piece of metal is stuck in the sole.

※If the measured value is above the upper limit

Example) Thick socks are worn.
Defective shoes, dirty soles, etc.

DIP switches for various settings

Upper and lower evaluation limits, evaluation buzzer, etc. can be made by setting the DIP switches.

Optional stand