Setting rings

Danh mục sản phẩm

Dịch vụ sửa chữa

Hỗ trợ trực tuyến

PHONG KINH DOANH

0898980203

HOTLINE3

0909053576

HOTLINE1

0904259271

HOTLINE2

0938825913

Bộ đếm truy cập

	Đang online	14
	Hôm nay	965
	Hôm qua	2028
	Tuần này	8263
	Tháng này	48291
	Tất cả	5371708

Setting rings

- Tên sản phẩm: Setting rings

- Model: Setting rings

- Tiêu chuẩn: JIS

- Xuất xứ: Japan

- Đơn giá: ()

- Bảo hành: Tháng

- Model khác: Setting rings

Đặt hàng

MÔ TẢ SẢN PHẨM

Bore Gages

For easy and accurate measurement of inside diameters

Setting Rings

SERIES 177 — Accessories for Inside Micrometers, Holtest and Dial Bore Gages

· USED FOR QUICK AND ACCURATE SETTING OF DIAL

it can be used for calibration.

How to read the indicated value

Series 526

Steel Setting Rings

177-205

177-139 177-146 177-300

THE 526 SERIES HAS A GAGE HEAD WITH HIGH CURVATURE.

ALIGNMENT WITH THEa' DIAMETER (A-A') IS ACHIEVED BY ROTATING

the gage head in the direction indicated by the arrow,

and the reading is the maximum value read from the dial

indicator.

Series 511

Anvil

図

径

ま

値

Workpiece

Ceramic Setting Rings

Guide plate

Anvil

Workpiece

Contact point

177-424 177-429 177-432

THE 511 SERIES PROVIDES A GUIDE PLATE TO ALIGN THE SETTING

ring diameter with the measurement axis of the bore

gage.

簡

の

DIMENSIONS

UNIT: MM

38.1

25.4

Marking

Side face

(Marking

face)

face

Side face

Side

face

(H)

Diameter

calibrated

at this

position

Marking

Type A Type B

SPECIFICATIONS

Steel Setting Rings

Metric

size ød

DIMENSIONS

(MM)

øD øE T

Tolerance

nominal size

and the actual

diameter

(μM)

Uncertainty

of marked

diameter

value

(μM)*1

ACCURACY

ROUNDNESS/

Cylindricity

(μM)*2

DISTANCE

from

the side

FACE H

(MM)

Size of

warranted

calibration

surface K

(MM)

size ød

DIMENSIONS (MM)

øD øE T

Type

ACCURACY

Tolerance

between Uncertainty DISTANCE Size of

the nominal of marked ROUNDNESS/ from warranted

size and diameter Cylindricity the side calibration

the actual value (μM)*2 FACE H surface K

diameter (μM)*1 (MM) (MM)

(μM)

177-220 1MM 20 — 4 A ±10 ±1.5 1 1.6 0.8

177-222 1.1MM 20 — 4 A ±10 ±1.5 1 1.6 0.8

177-225 1.2MM 20 — 4 A ±10 ±1.5 1 1.6 0.8

177-227 1.3MM 20 — 4 A ±10 ±1.5 1 1.6 0.8

177-230 1.4MM 20 — 4 A ±10 ±1.5 1 1.6 0.8

177-236 1.75MM 25 — 5 A ±10 ±1.5 1 1.6 1.8

177-239 2mm 25 — 5 A ±10 ±1.5 1 1.6 1.8

177-242 2.25MM 25 — 5 A ±10 ±1.5 1 1.6 1.8

177-208 2.5MM 25 — 7 A ±10 ±1.5 1 1.7 3.6

177-246 2.75MM 25 — 7 A ±10 ±1.5 1 1.7 3.6

177-248 3MM 25 — 7 A ±10 ±1.5 1 1.7 3.6

177-250 3.25MM 25 — 7 A ±10 ±1.5 1 1.7 3.6

177-252 3.5MM 25 — 7 A ±10 ±1.5 1 1.7 3.6

177-255 3.75MM 25 — 7 A ±10 ±1.5 1 1.7 3.6

177-204 4mm 25 — 7 A ±10 ±1.5 1 1.7 3.6

177-257 4.5MM 25 — 7 A ±10 ±1.5 1 1.7 3.6

177-205 5MM 25 — 7 A ±10 ±1.5 1 1.7 3.6

177-263 5.5MM 25 — 7 A ±10 ±1.5 1 1.7 3.6

177-267 6MM 25 — 7 A ±10 ±1.5 1 1.7 3.6

177-271 6.5MM 25 — 7 A ±10 ±1.5 1 1.7 3.6

177-275 7mm 25 — 7 A ±10 ±1.5 1 1.7 3.6

177-125 8mm 32 — 10 A ±10 ±1.5 1 2.0 6.0

177-279 9MM 32 — 10 A ±10 ±1.5 1 2.0 6.0

177-126 10MM 32 — 10 A ±10 ±1.5 1 2.0 6.0

177-284 12MM 32 — 10 A ±10 ±1.5 1 2.0 6.0

177-132 14MM 38 — 10 A ±10 ±1.5 1 2.0 6.0

Inch

DIMENSIONS

(MM)

Tolerance

between Uncertainty DISTANCE Size of

Type the nominal of marked ROUNDNESS/ from warranted

øD øE T size and diameter Cylindricity the side calibration

the actual value (INCH)*2 FACE H surface K

diameter (INCH)*1 (MM) (MM)

(INCH)

177-209 .1” 25 — 7 A ±.0004” ±.00006” .00004” 1.5 4.0

177-206 .16” 25 — 7 A ±.0004” ±.00006” .00004” 1.5 4.0

177-207 .24” 25 — 7 A ±.0004” ±.00006” .00004” 1.5 4.0

177-281 .275” 25 — 7 A ±.0004” ±.00006” .00004” 1.8 3.4

177-179 .35” 32 — 10 A ±.0004” ±.00006” .00004” 1.8 6.4

177-283 .425” 32 — 10 A ±.0004” ±.00006” .00004” 1.8 6.4

177-180 .5” 32 — 10 A ±.0004” ±.00006” .00004” 1.8 6.4

177-181 .6” 38 — 10 A ±.0004” ±.00006” .00004” 1.8 6.4

177-182 .65” 45 — 10 A ±.0004” ±.00006” .00004” 1.8 6.4

177-183 .7” 45 — 10 A ±.0004” ±.00006” .00004” 1.8 6.4

177-287 .8” 45 — 10 A ±.0004” ±.00006” .00004” 1.8 6.4

177-184 1” 53 — 15 A ±.0004” ±.00006” .00004” 3.0 9.0

177-289 1.2” 71 — 15 A ±.0004” ±.00006” .00004” 3.0 9.0

177-185 1.4” 71 — 15 A ±.0004” ±.00006” .00004” 3.0 9.0

177-291 1.6” 71 — 15 A ±.0004” ±.00006” .00004” 3.0 9.0

177-186 1.8” 85 — 15 A ±.0004” ±.00006” .00004” 3.5 8.0

177-177 16MM 45 — 10 A ±10 ±1.5 1 2.0 6.0

177-133 17MM 45 — 10 A ±10 ±1.5 1 2.0 6.0

177-285 18MM 45 — 10 A ±10 ±1.5 1 2.0 6.0

177-286 20MM 45 — 10 A ±10 ±1.5 1 2.0 6.0

177-139 25MM 53 — 15 A ±10 ±1.5 1 3.2 8.6

177-288 30MM 71 — 15 A ±10 ±1.5 1 3.2 8.6

177-140 35MM 71 — 15 A ±10 ±1.5 1 3.2 8.6

177-290 40MM 71 — 15 A ±10 ±1.5 1 3.2 8.6

177-178 45MM 85 — 15 A ±10 ±1.5 1 3.7 7.6

177-146 50MM 85 — 20 A ±20 ±1.5 1 3.7 12.6

177-292 60MM 112 — 20 A ±20 ±1.5 1 3.7 12.6

177-314 62MM 112 — 20 A ±20 ±1.5 1.5 3.7 12.6

177-147 70MM 112 — 20 A ±20 ±1.5 1.5 3.7 12.6

177-316 75MM 125 — 25 A ±20 ±1.5 1.5 4.2 16.6

177-294 80MM 125 — 25 A ±20 ±1.5 1.5 4.2 16.6

177-318 87mm 140 — 25 A ±20 ±1.5 1.5 4.2 16.6

177-148 90MM 140 — 25 A ±20 ±1.5 1.5 4.2 16.6

177-296 100MM 160 — 25 A ±20 ±1.5 2 4.2 16.6

177-298 125MM 210 168 B ±20 ±2.5 2 5.3 27.5

177-300 150MM 235 187 B ±20 ±2.5 2 5.3 27.5

177-302 175MM 260 215 B ±20 ±2.5 2.5 5.3 27.5

(25.4)

177-308 250MM 362 290 B ±20 ±2.5 3 5.3 27.5

177-310 275MM 413 321 B ±20 ±2.5 3 5.3 27.5

177-312 300MM 438 340 B ±20 ±2.5 3 5.3 27.5

DIMENSIONS (MM) ACCURACY

Tolerance

between Uncertainty DISTANCE Size of

Type the nominal of marked ROUNDNESS/ from warranted

øD øE T size and diameter Cylindricity the side calibration

the actual value (INCH)*2 FACE H surface K

diameter (INCH)*1 (MM) (MM)

(INCH)

177-187 2” 85 — 20 A ±.0008” ±.00006” .00004” 3.5 13.0

177-293 2.4” 112 — 20 A ±.0008” ±.00006” .00004” 3.5 13.0

177-315 2.5” 112 — 20 A ±.0008” ±.00006” .00006” 4.0 12.0

177-188 2.8” 112 — 20 A ±.0008” ±.00006” .00006” 4.0 12.0

177-317 3” 125 — 25 A ±.0008” ±.00006” .00006” 4.0 17.0

177-295 3.2” 125 — 25 A ±.0008” ±.00006” .00006” 4.0 17.0

177-319 3.5” 140 — 25 A ±.0008” ±.00006” .00006” 4.0 17.0

177-189 3.6” 140 — 25 A ±.0008” ±.00006” .00006” 4.0 17.0

177-297 4” 160 — 25 A ±.0008” ±.00006” .00008” 4.0 17.0

177-299 5” 210 168 38.1 B ±.0008” ±.00010” .00008” 5.0 28.1

177-301 6” 235 187 38.1 B ±.0008” ±.00010” .00008” 5.0 28.1

177-303 7” 260 215 38.1 B ±.0008” ±.00010” .00010” 5.0 28.1

177-305 8” 311 244 38.1 B ±.0008” ±.00010” .00010” 5.0 28.1

177-307 9” 337 264 38.1 B ±.0008” ±.00010” .00010” 5.0 28.1

177-309 10” 362 290 38.1 B ±.0008” ±.00010” .00012” 5.0 28.1

177-311 11” 413 321 38.1 B ±.0008” ±.00010” .00012” 5.0 28.1

177-313 12” 438 340 38.1 B ±.0008” ±.00010” .00012” 5.0 28.1

Cera Setting Rings

Metric

Inch

DIMENSIONS

(MM)

ACCURACY

DIMENSIONS

(MM)

ACCURACY

size ød

øD øE T

Tolerance

nominal size

and the actual

diameter

(μM)

Uncertainty

of marked

diameter

value

(μM)*1

ROUNDNESS/

Cylindricity

(μM)*2

DISTANCE Size of

from warranted

the side calibration

FACE H surface K

(MM) (MM)

size ød

øD øE T

Tolerance

nominal size

and the actual

diameter

(INCH)

Uncertainty

of marked

diameter

value

(INCH)*1

ROUNDNESS/

Cylindricity

(INCH)*2

DISTANCE Size of

from warranted

the side calibration

FACE H surface K

(MM) (MM)

177-418 4mm 25 — 7 A ±10 ±1.5 1 1.7 3.6

177-420 6MM 25 — 7 A ±10 ±1.5 1 1.7 3.6

177-423 8mm 32 — 10 A ±10 ±1.5 1 2.0 6.0

177-424 10MM 32 — 10 A ±10 ±1.5 1 2.0 6.0

177-425 12MM 32 — 10 A ±10 ±1.5 1 2.0 6.0

177-427 16MM 45 — 10 A ±10 ±1.5 1 2.0 6.0

177-429 20MM 45 — 10 A ±10 ±1.5 1 2.0 6.0

177-430 25MM 53 — 15 A ±10 ±1.5 1 3.2 8.6

177-431 30MM 71 — 15 A ±10 ±1.5 1 3.2 8.6

177-432 35MM 71 — 15 A ±10 ±1.5 1 3.2 8.6

177-433 40MM 71 — 15 A ±10 ±1.5 1 3.2 8.6

177-434 45MM 85 — 15 A ±10 ±1.5 1 3.2 8.6

177-518 .16” 25 — 7 A ±.0004” ±.00006” .00004” 1.5 4.0

177-520 .24” 25 — 7 A ±.0004” ±.00006” .00004” 1.5 4.0

177-522 .275” 25 — 7 A ±.0004” ±.00006” .00004” 1.5 4.0

177-523 .35” 32 — 10 A ±.0004” ±.00006” .00004” 1.8 6.4

177-524 .425” 32 — 10 A ±.0004” ±.00006” .00004” 1.8 6.4

177-525 .5” 32 — 10 A ±.0004” ±.00006” .00004” 1.8 6.4

177-527 .65” 45 — 10 A ±.0004” ±.00006” .00004” 1.8 6.4

177-529 .8” 45 — 10 A ±.0004” ±.00006” .00004” 1.8 6.4

177-530 1” 53 — 15 A ±.0004” ±.00006” .00004” 3.0 9.0

177-531 1.2” 71 — 15 A ±.0004” ±.00006” .00004” 3.0 9.0

177-532 1.4” 71 — 15 A ±.0004” ±.00006” .00004” 3.0 9.0

177-533 1.6” 71 — 15 A ±.0004” ±.00006” .00004” 3.0 9.0

177-534 1.8” 85 — 15 A ±.0004” ±.00006” .00004” 3.0 8.0

*1 ACTUAL DIAMETER IS MARKED IN 0.001 MM INCREMENTS.

*2 CYLINDRICITY IS DEfiNED AS PER JIS B 0621 DEfiNITIONS AND DESIGNATIONS OF GEOMETRICAL DEVIATIONS, SECTION 4.4 “CYLINDRICITY.” CYLINDRICITY IS MEASURED USING THREE CROSS-SECTIONS BETWEEN THE TOP AND BOTTOM FACE OF A RING, NAMELY, CLOSE TO THE FACE NEAR EACH SIDES AND THE CENTER.

Mitutoyo operates a policy of continuous improvement that aims to provide the customer with the benefit of the latest technological advances.

Therefore the company reserves the right to change any or all aspects of any product specification without notice.

C-46